ค้นหาสินค้า
บริการ
-
Multimeter
-
LCRMeter
-
Spectrum Analyzer
-
Oscilloscope
-
Vector Network Analyzer
-
Function generator
-
Audio Signal Generator
-
Frequency counter
-
RLC Dc Decade Resistance Box
-
Programmable electronic
-
Slide Voltage
-
Lab power supply
-
Clamp on meter
-
Power Analyser
-
Ultrasonic Flow Meter
-
Earth and Soil resistivity
-
Insulation tester
-
milliohm and microohm resistance tester
-
Impulse Winding Tester
-
Safety Tester/Hipot Tester
-
Tachometer Stoboscope
-
Vibration Meter
-
Anemometer
-
Sound meter
-
Lux meter
-
Water Quality Meter
-
Air Environment
-
Hygrometer Thermometer
-
Multifunction / Installation Tester
-
RF Spectrum Analyzer
-
Thermal Image camera
-
Infrared thermometer
-
EMF Spectrum Analyzer
-
Solar cell & Photovoltaic system
-
Calibrator
-
Battery Tester
-
High Voltage Hotline Tools
-
Miscellaneous Meter
-
Trainer Laboratory
-
Transformer Turns Ratio Meter
-
Insulation Oil Tester
-
Accessories
สมัครงาน
ลิ้งก์ภาพ
MACROEVTEST : เครื่องทดสอบความปลอดภัยและการป้องกันทางไฟฟ้าของเครื่องชาร์จแบตเตอรี่รถยนต์ , Type 2 plug , IEC/EN 61851-1 and IEC/EN60364-7-722
ข้อมูลสินค้า
-
รหัสสินค้า
MACROEVTEST
-
เข้าชม
2,676 ครั้ง
ยี่ห้อ
HTITALIA
รุ่น
MACROEVTEST
-
แก้ไขล่าสุดเมื่อ
19/03/2021 14:11
-
รายละเอียดสินค้า
MACROEVTEST : เครื่องทดสอบความปลอดภัยและการป้องกันทางไฟฟ้าของเครื่องชาร์จแบตเตอรี่รถยนต์
,Type 2 plug , IEC/EN 61851-1 and IEC/EN60364-7-722 Tester for checks on electric car recharging stations and verification of domestic and industrial electric systems MACROEVTEST, HT's new product for verification and checks on recharging stations for electric cars (EVSE) in compliance with standards IEC/EN 61851-1 and IEC/EN60364-7-722, and for safety tests in private and industrial environments. CHECKS ON RECHARGING STATIONS FOR ELECTRIC CARS Connection is simple. MacroEVtest is connected through the provided C100EV cable to EV-Test100, which is connected, through an in-built cable provided with type2 plug, to a recharging station. SIMPLIFIES EV-Test100 can simulate the presence of a car being recharged and, at the same time, dialogues with MacroEVtest thanks to the new display with touch screen system, peculiar to HT's latest generation devices. SIMULATES EV-Test100 can simulate the presence of a car being recharged and, at the same time, dialogues with MacroEVtest thanks to the new display with touch screen system, peculiar to HT's latest generation devices. GUIDES To correctly perform all tests, all you need to do is following the GUIDED PROCEDURE created by HT for this innovative instrument CONNECTS Before each test, MacroEVtest indicates how the cables must precisely be connected and, at the end of measurement, further to the detected values, it provides evaluations of the tests' outcomes, if compatible or not for the recharging station's safety, indicated by a green or red thumb symbol. TESTS ▪ CONTINUITY test of the recharging station's protection conductor ▪ INSULATION test of the recharging station ▪ Verification of the STATUSES of the recharging station ▪ Measurement of OVERALL EARTH RESISTANCE ▪ Verification of the RCD's tripping (test of RCDs type A, B and type B 6ma) VERIFICATION TESTS AND SIMULATIONS ▪ Vehicle not present ▪ Vehicle present but not being charged ▪ Vehicle present and being charged ▪ Events and anomalies which can be detected during the recharging phase ▪ Simulation of a fault on the protection conductor ▪ Indication of the presence of voltages on the EVSE output connector through LED ▪ Verification of the mechanical lock in the connection to the station: it is possible to check that the station, during the recharging phase, blocks the cable release (if the station is provided with this function) STANDARDS IEC/EN 61851-1 and IEC/EN60364-7-722 SAFETY CHECKS ON PRIVATE AND INDUSTRIAL SYSTEMS MEASURES The TFT colour display with touch-screen allows for a new and more versatile use of the instrument. MacroEVtest offers on its display all possible alternatives for the performance of a perfect measurement. PREPARES The new system adopted by HT allows optimally preparing the instrument, before performing a test, by suggesting the most suitable connections to certify correct and reliable tests. The AUTO function, in the system menu, allows performing the tests very quickly VALIDATES At the end of each test, further to the measured value, MacroEVtest provides an evaluation of the result, indicating whether it complies or not with standards. All tests can be saved and, in order to create a printable report, data can be transferred via WiFi to a PC, smart phone or tablet. TESTS ▪ Test of RCDs type A, type AC also up to 1000 mA and type B. By using the accessory RCDX10, provided with the instrument, it is also possible to test RCDs with external jaws up to 10 A. ▪ Insulation tests up to 1000V ▪ Continuity tests ▪ Tests of overall earth resistance and voltammetric resistance (further than with the provided rods, this latter test can also be performed by means of the optional clamp T2100). ▪ With the appropriate programming guided by the touch-screen system, this device can test the interruption power, tripping currents, I2t relevant to magneto-thermal switches (MCB) with curves B, C, D, K and fuses type gG and aM ▪ Loop/Line impedance measurements and calculation of the assumed short-circuit current with high resolution (0.1mOhm) in TN systems with the use of the optional accessory IMP57 STANDARDS IEC/EN 60364
Tags : MACROEVTEST_เครื่องทดสอบความปลอดภัยและการป้องกันทางไฟฟ้าของเครื่องชาร์จแบตเตอรี่รถยนต์