หน้าแรก

แนะนำสินค้าใหม่

รายละเอียดสินค้า

EV-TEST100 : เครื่องทดสอบระบบชาร์จรถยนต์ไฟฟ้า, Type 2 plug

TECHNICAL SPECIFICATIONS

Technical characteristics:
Input voltage: max 415V AC Phase-Phase, 50/60Hz ±5%
Connection to EVSE system: integrated cable with Type 2 plug, length 60cm
Recharging stations: charging modes 2 and 3
PP Simulation: NC,13A, 20A, 32A, 63A
CP Simulation: status A, B, C, D, ventilation/not ventilation
Simulation EVSE fault: Fault PE, Fault E
CP output signal: PWM communication protocol, 12V
Allowed output load: 240V, 50/60Hz, max 10A AC
Protection fuse: Fast type 250V/10A (5x20mm) (0.2x0.8in)

Mechanical characteristics:
Dimensions (L x W x H): 210 x 115 x 60mm (8 x 5 x 2in)
Weight (with integrated cable): 900g (32ounces)
Mechanical protection: IP40

Reference guidelines:
Safety: IEC/EN61010-1
EMC: IEC/EN61326-1
Sector guidelines: IEC/EN61851-1, IEC/EN60364-7-722
Insulation: double insulation
Measurement category: CAT III 300V
Pollution degree: 2

Environmental specifications:
Working temperature: 0°C ¸ 40°C (32°F ¸ 104°F)
Working humidity: <80%RH
Storage temperature: -10°C ¸ 60°C (14°F ¸ 140°F)
Storage humidity: <80%RH
Max operating altitude: 2000m (6562ft)